A simple system for plant cell microinjection and culture

Microinjection of plant protoplasts and cells has been recently reported, however a system that combines simplicity of design, harmless immobilization, high resolution visibility and ability to monitor individual target cells is lacking. This report describes a system which combines these features. It consists of a microinjection-microculture dish containing immobilized protoplasts and a simple chamber that maintains sterility and humidity during injection. Highly purified protoplast preparations are plated at low population density as a thin monolayer of widely separated cells embedded in agarose layered over a thicker (0.2 mm at center to 1 mm at edge) layer of agarose-solidified medium. This physical arrangement allows for rapid location, mapping and injection of the immobilized protoplasts and also their subsequent location for growth monitoring. The double layers of agarose provide adequate nutrition for culturing injected cells to the microcalli stage. In addition to protoplast injection, this system was also used to inject 3- to 4-day old nonspherical cells derived from protoplasts. Colony formation rates from injected protoplasts and cells with regenerated walls were equivalent to those of uninjected controls. Furthermore, tobacco protoplasts stored at 4°C in liquid medium for up to two weeks remained fully competent for plating and injection. These cold-stored protoplasts, when injected, formed colonies at rates similar to those from fresh preparations. The ability to store protoplasts without loss of viability considerably increases the ease and convenience of cell injection experiments.Mention of a trademark or proprietary product does not constitute a guarantee or warranty of the product by the USDA, and does not imply its approval to the exclusion of the other products that may also be suitable.     

High density culture of hybridoma cells using a perfusion culture vessel with an external centrifuge

The influence of centrifugal force on the growth of cells was examined by exposing the cells of the mouse-human hybridoma X87 line to centrifugal force (100–500 G) for ten minutes twice a day and comparing the static culture with that of unexposed cells. In this experiment, both cell proliferation and specific antibody productivity were independent of the centrifugal effect, and gave the same results as in the case of no exposure to centrifugal force. High density cultivation of the mouse-human hybridoma X87 line was obtained by a perfusion system where the cells were separated from the culture medium by continuous centrifugation. In the serum-free culture, the maximum viable cell density exceeded 10⁷ cells/ml, and monoclonal antibody was stably produced for 37 days. The results in this culture were equivalent to those obtained by intermittent centrifugal cell separation from the culture medium, and separation by gravitational settlement.     

Purification and characterization of immunoglobulin production stimulating factor derived from human B lymphoblastoid HO-323 cells

An immunoglobulin (Ig) production stimulating factor (IPSF) for hybridomas was found in spent medium of the human B lymphoblastoid cell line, HO-323. The IPSF was purified by serial use of DEAE chromatography, ultrafiltration, gel filtration and HPLC-DEAE chromatography. Purified IPSF was estimated to be a 410 k macro molecule by gel filtration, and contained three types of isomers which were separated from each other by native polyacrylamide gel electrophoresis. All of the isomers were, however, assumed to have the same protein components by SDS polyacrylamide gel electrophoresis.The IPSF was effective for human-human and mouse-mouse hybridomas producing IgM, but not for IgG producers in the experimental condition used here. Human-human hybridoma HF10B4, cultured in IPSF-containing medium, produced 20 times more IgM than in IPSF-free medium under serum-free conditions. The IPSF showed very little proliferation stimulating activity on HF10B4 cells.     

High cell density perfusion culture of hybridoma cells recycling high molecular weight components

We have developed a high cell density and high product concentration culture system recycling high molecular weight components. The production of monoclonal antibodies in high concentration was performed by this culture system with mouse human hybridoma H2 and V6 cells in serum-free defined media.The concentration of IgG after 48 days culture of H2 cells in ITES-eRDF reached 2 mg/ml and the purity of IgG in culture fluid was 61%. In addition, high molecular weight components in serum-free media, such as transferrin or BSA, could be reduced to 5% of the original concentration.     

Batch production and growth kinetics of hybridomas

Batch cultures of mouse-mouse hybridoma cell lines were carried out and their growth and production kinetics investigated. Three main cell specific production patterns (expressed as pg IgG/cell x hour) were found, which can be used as a classification system for hybridoma cell lines (groups I–III). Cells showing the highest IgG-production at the beginning of the batch culture (during the lag and the onset of the log-phase) were classified as either group I and II. The difference was that cell lines of group II showed a second high cell specific production at the onset of the stationary and death phases. Cell lines of group III had a quite constant production of antibodies during their growth; but IgG secretion completely stopped after the beginning of the stationary phase. The implications of these three production patterns on the design of a production process are discussed.     

Purification and characterization of lymphocytic clonal growth factor (LCGF) derived from human-human hybridoma SH-76 cells

Human-human hybridoma SH-76 cells were found to produce a factor that supported the growth of lymphocytic cells at low densities. The factor was purified from serum-free conditioned medium of the hybridoma cells by a successive application of ammonium sulfate precipitation, DEAE-Toyopearl, TSK G3000 SW and DEAE-5PW column chromatograph. The purified factor was a 72K single protein. The factor showed marked growth stimulating effect on lymphocytic cell lines, but had no effect on the growth of human adhesive cancer cell lines. Thus, the factor is a lymphocytic clonal growth factor (LCGF), as found previously in human plasma (Miyata, 1988). The LCGF of SH-76 cells could be produced in growth factor-free RPMI medium and purified easily from the conditioned medium. The factor is inactivated by heating at over 80°C, but is much more stable than the LCGF in human plasma.     

用体外免疫法建立人—人抗流行性乙型脑炎病毒杂交瘤细胞株

利用单克隆抗体(McAb)进行病毒病的治疗是人们所关心的一个重大课题。 流行性乙型脑炎(乙脑)是一种严重威胁人民健康的急性传染病,病死率高,后遗症严重。国内外目前尚无特效疗法。陈伯权等用乙脑病毒皮下或腹腔感染3周龄小白鼠24、48小时及5天后,分别用乙脑病毒51-8McAb进行治疗,平均治愈率分别为78％、73％及22％。     

Human hybrid immunoglobulin M containing immunoglobulin A

Summary Some hybridoma clones made by fusion of a human lymphoblastoid cell line, HO323 with human B lymphocytes, secreted not only IgA but also IgM-like immunoglobulin molecules. The IgM-like immunoglobulin had a molecular size of 900 K which corresponded to that of IgM. Immunochemical analyses revealed that the IgM-like immunoglobulin contained two monomeric IgA and three monomeric IgM molecules. In the IgA moieties, half of original light chains were replaced withx chains derived from the IgM, and vice versa.     

Viability measurements of hybridoma cells in suspension cultures

Several methods were applied to determine the viability of hybridoma cells in suspension. These methods include dye inclusion and exclusion assays such as the classical trypan blue exclusion assay, the propidium iodide (PI) exclusion assay and the fluorescein diacetate (FDA) inclusion assay. Furthermore, the relation was studied between release of lactate dehydrogenase (LDH) by hybridoma cells and their viability. Also the ATP content of the cells and cellular heterogeneity as measured with a flow cytometer were determined in relation to cellular viability. The dye inclusion and exclusion assays using trypan blue, FDA, PI were shown to be useful methods to determine cellular viability. With the FDA and PI methods it was possible to obtain additional information about cells which are in a transition state between viable and non-viable. The viability according to the scatter properties of the cells appears to reflect the overall condition of the cells, although interpretation of the results is difficult. Measurement of LDH release in the culture fluid or the cytoplasmic ATP content could not be used as parameters for cell viability.     

The membrane dialysis bioreactor with integrated radial-flow fixed bed —a new approach for continuous cultivation of animal cells

A hybridoma cell was cultivated continuously in a membrane dialysis bioreactor with an integrated radial-flow fixed bed consisting of porous Siran^® carriers over a period of 6 weeks. Antibodies accumulated to an average of 100 mg l^?1, approx. 10 times more than in fixed bed cultures without dialysis membrane. Serum costs could be reduced about 85% due to an appropriate feeding strategy. Siran^® carriers with 3–5 mm diameter showed an advantage compared to those with 1–2 mm diameter. For the 3–5 mm carrier the specific glucose uptake rate and the MAb production rate were constant, if the velocity was between 0.09 mm s^?1 and 0.75 mm s^?1. At higher velocities cells are washed out of the bed. Furthermore antibody consistency and cell stability were verified in long-term cultivations over a period of 96 days. From an estimation of the antibody concentration reachable with the reactor concept under optimal conditions a concentration 45 times higher compared to axial-flow fixed bed reactors and 11 times higher compared to stirred tank reactors can be expected.